6063 T5 black anodized Aluminum Profiles
Product Description
Characteristics of Aluminum Profile:
-Corrosion Resistance
The density of aluminum profile is only 2.7g/cm3, which is about 1/3 of that of steel, copper or brass (7.83g/ cm3, 8.93g/ cm3, respectively). In most environmental conditions, including in air, water (or salt water), petrochemistry and many chemical systems, aluminum can show excellent corrosion resistance.
-Conductivity
Aluminum profile is often selected for its excellent conductivity. On the basis of equal weight, the conductivity of aluminum is nearly twice that of copper.
-Thermal conductivity
The thermal conductivity of Aluminum Alloy is about 50-60% of copper, which is beneficial to the manufacture of heat exchanger, evaporator, heating appliance, cooking utensil, cylinder head and radiator of automobile.
two
-Nonferromagnetism
Aluminum profile is non ferromagnetic, which is an important feature for the electrical and electronic industries. Aluminum profiles cannot be self ignition, which is important for the application of handling or contacting inflammable and explosive materials.
-Machinability
The machinability of aluminum profile is excellent. In various deformation and Casting aluminum alloys, and in the various states after the production of these alloys, the machining characteristics have changed greatly, which requires special machine tools or technologies.
-Formability
The allowable deformation is controlled by specific tensile strength, yield strength, ductility and corresponding processing hardening rate.
-Recyclability
Aluminum has high recovery, and the characteristics of recycled aluminum are almost the same as that of primary aluminum.
Product Details:
Description 6063 Customized colorful surfaces 6m length
Material Thickness(t) t=0.8-2.0 mm Materiral Aluminum Alloy 6063 Annealing Treatment T3-T8 Color Blue,Yellow,Beige,blue,green,white,black,red,etc Surface Treatment sand powder coated, electrophoresis, wood grain, polished and etc Shape Square, Round, Flat, Oval, and according to customer's drawing. Length Normal length=6m or in customer's order Usage Building, Production Line, Decoration, Industrial, Transportation, Door and window, etc. Package 1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Advantages/Features Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
6063 Customized colorful surfaces 6m length
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
Introduction of Electrophoresis:
Aluminum or aluminum alloy products are used as anodes in electrolyte solution, and the process of forming aluminum oxide film on the surface of the aluminum and aluminum alloy is called anodic oxidation treatment of aluminum and aluminum alloy. After anodization, the surface of aluminum can produce several microns - hundreds of microns of oxide film. Compared with the natural oxide film of aluminum alloy, its corrosion resistance, wear resistance and decoration have been obviously improved and improved.
- The aluminum oxide film is a porous membrane. Whether it is coloured or not, it must be closed before being put into use, so as to improve its corrosion resistance and weatherability. There are three kinds of treatment methods, namely, high temperature hydration reaction closed, inorganic salt closure and organic matter closure.
(1) High temperature water sealing.
This method utilizes the hydration reaction of aluminum oxide film and water to turn the amorphous membrane into a hydrated crystalline membrane.
The hydration reaction can be carried out at both normal and high temperatures, but at high temperatures, especially at the boiling point, the hydrated crystalline membrane is a very stable and irreversible crystalline film. Therefore, the most commonly used aluminum oxide film is treated by boiling water or steam treatment.
(2) Sealing of inorganic salts.
Inorganic salt method can improve the fastness of organic coloring dyes, so it is often used in chemical coloring.
(3) Organic sealing method.
This is the soaking, soaking or coating of the aluminum oxide film. Because of the high cost and the increase of the process flow, it is not easy to use, more or more of the two kinds of methods mentioned above, and the first kind of high temperature hydration is the mainstream.
Implement National Standard GB/5237.2-2008
Ingot State Nonferrous mental industrial standard YS67-93
Chemical Of Oxide Film GB/T3190-96
Class Of Oxide Film AA10 , AA15 ,AA20
Surface Type Matte ,Flat
Colors Silver , White ,Bronze , Champagne
Advantage/Features Corrosion-Resistant , Durable , Shining And Decorative
Product Categories : Aluminum Profiles > Anodized Aluminum Prfoiles